Product Details:
Minimum Order Quantity | 50 Piece |
Material | Brass |
Pressure | 5-20 Bar |
Usage/Application | Misting,Cooling |
Brand | SFE |
Color | Silver |
Thread Size | Nil |
Size | 6mm Orifice |
Name: Low-pressure Misting Nozzles
Nozzles Material:Stainless steel
Nozzles Connection size: 6mm or 8mm dia. for plug
Nozzles Orifice: 0.6 mm
Nozzle Hole Size :-0.3 mm
Pressure:5bar~20bar
3-way connector and L connector Interface size: 6 mm
3-way connector and L connector Material: metal, plastic
Function: anti drip valve
Purpose:humidification, dust, cooling, landscaping.
Features:
Not easy clogged,wear resistance,spray evenly, can effectively improve the quality and production efficiency. Can effectively regulate the humidification amount and the spray effect.
The series of nozzles no air-assisted, simple system installation. Mist spot are fine, up to 3-7 microns,fully atomized, energy saving,low cost and good effect.
Scope:
1.Sanitazation- Sanitazation of our body
2. Cooling - outdoor restaurants,entertainment venues, stadiums, arenas, airports, bus stations, large gatherings, cooling animal farm pig, horse and sheep
3. Dust removal - clear the air of dust particles, mainly used to control pollution of farm and Mine
4. Agriculture - for the family farm, cultivated field mushrooms, circus arena, aviary kennel and feeding farm, make the environment suitable for the growth of all kinds of poultry
5. Industrial - metal shop, machine shop, textile workshop, garment workshop, dyeing footwear, plastic injection molding, die casting heat treatment, glass, spray plating, electronic chemicals, metallurgy, leather, toy manufacturing, electronics manufacturing, for cooling dust removal
6. Special Use spaces - gardens, zoos, shopping centers, exhibitions, flowers farming, animal husbandry, and so on, humidification cooling, it can also be used to irrigate plants
Leak-proof, self-sealing o-ring included with each nozzle;
No tape or sealant is required.
The nozzle with water filter requires simple maintenance; soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | garden,green house,farm,potted plant,trampoline,patio |
Material | Brass |
Material Grade | Brass |
Type | Misting,Sanitization |
Color | silver |
Country of Origin | Made in India |
1) It is easy to assemble and operate;
2) It can be applied for Misting or Spraying the Plants or Flowers in the feild of Garden, Greenhouse or Patio
3) The Mist Area can reach to 0.8m~2m depend on the water gage;
4) It is made of good and healthy material.
Specification
Size:10 meters Color :Black& Blue Tube: 1/4'' PE water tube (External Diameter: 6.5mm; internal Diameter :4mm) Nozzle: 0.4mm Orifice Quick Insertion Nozzle 3-way Tee Connector: 6.5mm Internal Diameter ; Plug In structure Faucet Connector: Internal Diameter : 25mm; Internal Thread
Additional Information:
Product Details:
Minimum Order Quantity | 1 Pack |
Material | Brass |
Color | White |
Temperature | 0-60 Degree |
Thread Size | 10/24 UNC |
I Deal In | New Only |
Location | India |
8M-18M option mist cooling kit:
Easy to operate, easy to use, and fast to clean;
Can be used for garden humidification and watering;
Automated irrigation to free your hands
PE material, high safety factor, more confidence in use;
Description:
Nozzle Material: Brass body with stainless steel orifice inside.
Nozzle Thread: 10/24UNC
Mist hose: Food grade material, 1/4" size;
Function: Cooling, Humidification, dedusting and Garden Micro irrigation
Details
Pump description:
Temperature------------------0-60 degree celsius
Multi-purpose-----------------Home use for garden sprinklers,shower,water taps in the boat,caravan or motor home
Agricultural purposes-------spray for farm chemical pesticid
corrosion resistant
12vDC
Power---------------------------60W
Working pressure------------0.8Mpa
Flow rate------------------------5L/min
Size:------------------------------16.5*10*6cm
Rubber bracket can absorb vibration from the pump when working
Connector size: 1/4' pipe
Caution:pump should be used in dry condition,cannot submerge into water
Installation Steps:
1. Keep the 3M water inlet totally immersed into the tank.
2. Connect hose and pump with 1/2' white connectors, note the arrow direction of inlet and outlet on the pump.
3. Connect the power supply to wash the system for 1 minute to purge the system and remove any impurities.
4. Screw the misting nozzles to the Tee fittings, except the last one on the end plug.
5. Turn on the power to wash the system for 2 minutes to insure that the system is fully purged.
6. Turn off the power and install the last nozzle into the fitting with the end plug.
7. Fix the misting line by the cable ties saddle clamps provided.
8. Turn on power then jets will work, enjoy the cooling misting system.
9. Turn off the nozzles, keep them dry and clean when you don't use the misting system for a long time.
· Application as below:
·
· Landscaping, cooling, air humidification, spray disinfection, epidemic prevention, deodorizing air purification, etc
·
· Note: Soaking the misting nozzle in cleaner periodically to remove mineral deposits, thus can prolong its lifetime.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Connection Type | 1/4 BSPP |
Orifice Material | Brass |
Basic Material | Brass |
Hole Diameter | 0.4mm |
· Top quality construction: Made of high-quality brass, this misting kit is durable and easy to clean. the pump has a built-in fan blade that can be easily disassembled for convenient storage.
· Widely occasions: The misting kit is suitable for all kinds of outdoor activities, such as camping, fishing, hiking, traveling, etc.
· Quick and easy installation: This brass misting kit is easy to install and disassemble, no tools required. it can be installed in a few seconds without taking up too much space.
Advantage:
· 【 EFFECTIVE MIST COOLING 】 Cools the surrounding area up to 20 degrees or 68℉, misting cooling system helps you beat the heat during this summer.
·
· 【 Mini Silent Pump】Mini and silent pump : portable and space saving, to make your life quiet and peaceful .
·
· 【 UPGRADE HIGH QUALITY BRASS NOZZLE 】 The mist nozzle is made from brass material,0.4mm hole of nozzles provide excellent misting effect, cooling the temperature fast.
·
· 【 PRE-ASSEMBLED DESIGN 】 Arriving assembled in the package, the misting ring is easy to secure on fans with attach the preassembled misting line with the included cable ties , and then connect to a standard garden hose to immediately experience the benefit of mist cooling.
·
· 【 EASY TO USE 】 Atomizing fan kit can be assembled in less than 10 minutes. The exclusive valve on the fan mister hose makes it easier for you to turn on/off misting or adjust to the right amount of spray you want for cooling off in the patio.
Additional Information:
Product Details:
Usage/Application | Humdification |
Material | Copper |
Design | humidification |
Color | Silver |
I Deal In | New Only |
Location | India |
Specifications:
Material:CopperPressure:0-100 BarConnector Interface size:3/8"or 9.52mm Advantage:Quick installation, simple and flexible,space-saving.Even after installation, the direction of tubing can be changed freely.The special design of the slip lock connector to make it more convenient and labor saving for disconnection.Please Note:The size is measured by hands, please allow minor error of measurement. Photo color might be a little different from the actual product due to color display of different monitors.